manualshive.com logo in svg

DS Automobiles DS 5, Handbook

Share
Download
DS Automobiles DS 5 Handbook Download Page 234

DS5_en_Chap08_info-pratiques_ed02-2015

Fitting roof bars

Maximum authorised load evenly 
distributed on the roof bars, for a 
loading height not exceeding 40 cm 
(with the exception of bicycle carriers): 

70

 kg.

If the height exceeds 40 cm, adapt the 
speed of the vehicle to the profile of the 
road to avoid damaging the roof bars 
and the fixings on the roof.

When fitting transverse roof bars, take care to 
position them correctly:

Use accessories recommended by 
CITROËN observing the manufacturer's 
recommendations and fitting 
instructions so as to avoid the risk 
of damaging the body (deformation, 
scratches, ...).

F

  Remove the cap using an allen

TM

 key.

F

  Put the bars into position then fit and 

tighten the securing screws.

Be sure to refer to national legislation in 
order to comply with the regulations for 
transporting objects which are longer 
than the vehicle.

Summary of Contents for DS 5

























































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands