manualshive.com logo in svg

DS Automobiles DS 5, Handbook

Share
Download
DS Automobiles DS 5 Handbook Download Page 111

109

Driving

DS5_en_Chap04_conduite_ed02-2015

Hill start assist

System which keeps your vehicle immobilised 
temporarily (approximately 2 seconds) when 
starting on a gradient, the time it takes to 
move your foot from the brake pedal to the 
accelerator pedal.
This system only operates when:
-  the vehicle is completely stationary, with 

your foot on the brake pedal,

-  certain gradient conditions are met,
-  with the driver’s door closed.
The hill start assist system cannot be 
deactivated.

On an ascending slope, with the vehicle 
stationary, the vehicle is held for a 
momentarily when you release the brake 
pedal:

-  provided you are in first gear or neutral with 

a manual gearbox,

-  provided you are in position 

d

 or 

M

 with an 

automatic gearbox.

Operation

On a descending slope, with the vehicle 
stationary and reverse gear engaged, the 
vehicle is held momentarily when you 
release the brake pedal.

Do not leave the vehicle while it is being 
held in the hill start assist phase.
If you need to leave the vehicle with the 
engine running, apply the parking brake 
manually then ensure that the parking 
brake warning lamp and the warning 
lamp 

P

 in the lever of the electric 

parking brake control are on fixed (not 
flashing).

Operating fault

If a fault in the system occurs, these warning 
lamps come on. Contact a CITROËN dealer 
or a qualified workshop to have the system 
checked.

Summary of Contents for DS 5

























































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands