manualshive.com logo in svg

DS Automobiles DS 5, Handbook

Share
Download
DS Automobiles DS 5 Handbook Download Page 232

DS5_en_Chap08_info-pratiques_ed02-2015

Towing your vehicle

Towing another vehicle

F

  On the front bumper, unclip the cover 

by pressing at the top to disengage the 
securing lugs.

F

  Screw the towing eye in fully.

F

  Install the towing arm.

F

  On the rear bumper, unclip the cover by 

levering at the left with the point of the 
towing eye.

F

  Screw the towing eye in fully.

F

  Install the towing arm.

F

  Switch on the hazard warning lamps on 

both vehicles.

F

  Move off gently and drive at low speed and 

for a short distance only.

F

  Place the gear lever in neutral 

(position 

N

 with an automatic 

gearbox).

 

Failure to follow this advice could 
result in damage to certain systems 
(braking, transmission...) and the 
absence of braking assistance the 
next time the engine is started.

F

  Unlock the steering and release the 

parking brake.

F

  Switch on the hazard warning lamps on 

both vehicles.

F

  Move off gently and drive at low speed and 

for a short distance only.

Summary of Contents for DS 5

























































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands