manualshive.com logo in svg

DS Automobiles DS 5, Handbook

Share
Download
DS Automobiles DS 5 Handbook Download Page 20

Petrol-Diesel instrument panel

1.

  Rev counter (x 1 000 rpm or tr/min), 

graduation according to engine (petrol or 
Diesel).

2.

  Fuel gauge.

3.

  Engine coolant temperature gauge.

4.

  Analogue speedometer (mph or km/h).

5.

  Cruise control or speed limiter settings.

A.

  Main lighting and controls dimmer.

B.

  -  Short press: display in turn of servicing 

information, remaining range for the 
AdBlue additive and the alert log.

 

-  Long press: reset the service indicator or 

trip recorder (depending on context).

6.

  Gear shift indicator or gear lever position 

and gear engaged for an automatic 
gearbox.

7.

  Instrument panel screen: distance 

recorders, service indicator, engine oil 
level indicator*, remaining range for the 
AdBlue additive and the SCR system*, alert 
messages, trip computer, media currently 
playing, navigation instructions*.

8.

  Digital speedometer (mph or km/h).

dials and screens

control buttons

When switching the ignition on or off, 
the speedometer needle and the bars of 
the dials carry out a full sweep and then 
return to 0.

* Depending on version.

Summary of Contents for DS 5

























































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands