manualshive.com logo in svg

DS Automobiles DS 5, Handbook

Share
Download
DS Automobiles DS 5 Handbook Download Page 50

If dashes are displayed continuously 
while driving in place of the digits, 
contact a CITROËN dealer or 
a qualified workshop.

This value may vary following a change 
in the style of driving or the relief, 
resulting in a significant change in the 
current fuel consumption.

Trip computer, a few definitions…

Range

(miles or km)
This indicates the distance which 
can still be travelled with the fuel 
remaining in the tank in relation 
to the average fuel consumption 
over the last few miles 
(kilometres) travelled.

When the range falls below 20 miles (30 km), 
dashes are displayed. After filling with at least 
5 litres of fuel, the range is recalculated and is 
displayed when it exceeds 60 miles (100 km).

This function is only displayed from 
20 mph (30 km/h).

current fuel consumption

(mpg or l/100 km or km/l)
This is the average fuel consumption 
during the last few seconds.

Average fuel 
consumption

(mpg or l/100 km or km/l)
This is the average fuel 
consumption since the last trip 
computer zero reset.

Average speed

(mph or km/h)
This is the average speed calculated 
since the last trip computer zero 
reset (ignition on).

Stop & Start time 
counter

(minutes / seconds or hours / 
minutes)

If your vehicle is fitted with Stop & Start, 
a time counter calculates the time spent in 
STOP mode during a journey.
It resets to zero every time the ignition is 
switched on.

Summary of Contents for DS 5

























































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands