DS Automobiles DS 5 Handbook Download Page 49

Page: 49 / 376

Monitoring

Touch screen

Instantaneous

Trip 1

Trip 2

00.0 / Reset

display of information

The current instantaneous fuel consumption tab with:
-  the range,
-  the current fuel consumption,
-  the Stop & Start time counter.

The trip

"1"

tab with:

- the average speed,
- the average fuel consumption,

for the first trip.

The trip

"2"

tab with:

- the average speed,
- the average fuel consumption,

for the second trip.

When the desired trip is

displayed, press the reset button
or press and hold the end of the
wiper control stalk.

Trip reset

Trips

"1"

and

"2"

are independent but their use

is identical.
For example, trip

"1"

can be used for daily

figures, and trip

"2"

for monthly figures.

The trip computer information is displayed in
the primary page of the menu.

Press one of the buttons to display the

desired tab.

Select the "

driving

" menu.

Summary of Contents for DS 5

























































































































































































































































































































































































Search results

Summary of Contents for DS 5

Reviews:

Brands by name

Popular brands

DS Automobiles DS 5, Handbook

Search results

Summary of Contents for DS 5

Reviews:

Brands by name

Popular brands