manualshive.com logo in svg

DS Automobiles DS 5, Handbook

Share
Download
DS Automobiles DS 5 Handbook Download Page 280

DS5_en_Chap11b_BTA_ed02-2015

Emergency or assistance call

If an impact is detected by the airbag 
control unit, and independently of 
the deployment of any airbags, an 
emergency call is made automatically.

Localised Emergency call

In an emergency, press this 
button for more than 2 seconds.
Flashing of the green indicator 
lamp and a voice message 
confirm that the call has 
been made to the "Localised 
Emergency Call"* centre.

Pressing this button again immediately cancels 
the call.
The green indicator lamp goes off.
At any time, pressing this button for more than 
8 seconds cancels the call.

The green indicator lamp remains on (without 
flashing) when communication is established.
It goes off at the end of the call.

This call is dealt with by the "Localised 
Emergency Call" centre, which receives 
locating information from the vehicle and 
can send a detailed alert to the appropriate 
emergency services.

In countries in which a centre is not 

operational, or when the locating service 
has been expressly declined, the call is dealt 
with directly by the emergency services (112) 
without the vehicle location.

*  These services are subject to conditions and 

availability.

  Consult a CITROËN dealer.

If you benefit from the DS Connect BOX 
offer with the SOS and assistance 
pack included, you also have available 
additional services in your MyCITROËN 

personal space,  
via the CITROËN Internet website in 
your country, accessible on  

www.citroen.com.

Summary of Contents for DS 5

























































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands