manualshive.com logo in svg

DS Automobiles DS 5, Handbook

Share
Download
DS Automobiles DS 5 Handbook Download Page 64

DS5_en_Chap02_ouvertures_ed02-2015

Boot

F

  After unlocking the boot only or the vehicle, 

press the opening control then raise the 
tailgate.

Opening from outside

F

  Press this button until the boot is heard to 

unlock.

Tailgate release

Unlocking

F

  Fold back the rear seats to gain access to 

the lock from inside the boot.

F

  Insert a small screwdriver into hole 

A

 of the 

lock to unlock the tailgate.

F

  Move the latch to the left.

System allowing the mechanical unlocking 

of the boot in the event of a battery or central 

locking system malfunction.

Locking after closing

If the fault persists after closing again, the boot 
will remain locked.

closing

F

  Lower the tailgate using the interior grab 

handle.

If the tailgate is not closed correctly, 

engine 

running

 or 

vehicle moving

 (speed above 

6 mph (10 km/h)), a message appears in the 
instrument panel screen for a few seconds.

Opening from inside

Summary of Contents for DS 5

























































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands