manualshive.com logo in svg

DS Automobiles DS 5, Handbook

Share
Download
DS Automobiles DS 5 Handbook Download Page 146

DS5_en_Chap05_visibilite_ed02-2015

Foglamp selection ring

The foglamps operate with dipped and main beam headlamps.

Rotate and release the ring:

F

  forwards a first time to switch on the front 

foglamps,

F

  forwards a second time to switch on the 

rear foglamps,

F

  rearwards a first time to switch off the rear 

foglamps,

F

  rearwards a second time to switch of the 

front fog lamps.

When the headlamps switch off with automatic 
illumination of headlamps (AUTO model) 
or when the dipped beam headlamps are 
switched off manually, the foglamps and 
sidelamps remain on.

F

  Turn the ring rearwards to switch off 

 

the foglamps, the sidelamps will then 
switch off.

In good or rainy weather, by both day 
and night, the front foglamps and the 
rear foglamps are prohibited. In these 
situations, the power of their beams 
may dazzle other drivers. They should 
only be used in fog or falling snow.
In these weather conditions, you should 
switch on the foglamps and dipped 
beam headlamps manually, as the 
sunshine sensor may detect sufficient 
light.
Do not forget to switch off the front and 
rear foglamps when they are no longer 
necessary.

Front and rear  
foglamps

Summary of Contents for DS 5

























































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands