manualshive.com logo in svg

DS Automobiles DS 5, Handbook

Share
Download
DS Automobiles DS 5 Handbook Download Page 21

19

Monitoring

Indicator and warning lamps

When the engine is started, these same 
warning lamps should go off.
If they remain on, before moving off, refer to the 
information on the warning lamp concerned.

Associated warnings

The switching on of certain warning lamps may 
be accompanied by an audible signal and a 
message in the instrument panel screen.
The warning lamps may come on continuously 
(fixed) or flash.

Certain warning lamps may come on in 
one of two modes: fixed (continuous) or 
flashing.
Only by relating the type of illumination 

to the operation of the vehicle can it 

be determined whether the situation is 
normal or a fault has occurred.
Refer to the tables on the following 
pages for more information.

Visual indicators informing the driver that a 
system is in operation, switched off or has a 
fault.

When the ignition is switched on

Certain warning lamps come on for a few 
seconds in the instrument panel and/or 
instrument panel screen when the vehicle's 
ignition is switched on.

Summary of Contents for DS 5

























































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands