manualshive.com logo in svg

DS Automobiles DS 5, Handbook

Share
Download
DS Automobiles DS 5 Handbook Download Page 123

121

Driving

DS5_en_Chap04_conduite_ed02-2015

Operating fault

In the event of a fault in STOP mode, the 
vehicle may stall.
All of the instrument panel warning lamps 

 

come on.
It is then necessary to switch off the ignition 
and start the engine again using the "

START/

STOP

" button.

In the event of a fault with the system, the 

button in the 

"EcO OFF"

 switch flashes for a 

few moments, then remains on.
Have it checked by a CITROËN dealer or a 
qualified workshop.

The Stop & Start system requires a 
12 V battery of specific technology and 
specification.
All work on this type of battery must be 
carried out only by a CITROËN dealer 
or a qualified workshop.
For more information on the 12 V 
battery, refer to the corresponding 
section.

Summary of Contents for DS 5

























































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands