manualshive.com logo in svg

DS Automobiles DS 5, Handbook

Share
Download
DS Automobiles DS 5 Handbook Download Page 24

Warning / indicator lamp

State

cause

Action / Observations

Automatic 
wiping

fixed.

The wiper control is pushed 
downwards.

Automatic front wiping is activated.
To deactivate automatic wiping, operate the control 
stalk downwards or put the stalk into another position.

Passenger's 
airbag system

fixed in the seat belt 
and passenger's front 
airbag warning lamps 
display.

The control switch, located in the glove 
box, has been placed in the 

"ON"

 

position.
The passenger's front airbag is activated.
In this case, do not install a rearward 
facing child seat on this seat.

Move the control switch to the 

"OFF"

 position to 

deactivate the passenger's front airbag.
In this case, you can install a rearward facing child 
seat, unless there is a fault with the airbags (airbag 
warning lamp on).

Stop & Start

fixed.

When the vehicle stops (red lights, 
traffic jams, ...) the Stop & Start 
system has put the engine into 
STOP mode.

The warning lamp goes off and the engine restarts 
automatically in START mode, as soon as you want to 
move off.

flashes for a few 

seconds, then goes 
off.

STOP mode is temporarily 
unavailable.

or

START mode is invoked 
automatically.

For more information on Stop & Start, refer to the 
corresponding section.

Summary of Contents for DS 5

























































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands