DS Automobiles DS 5 Handbook Download Page 79

Page: 79 / 376

Comfort

DS5_en_Chap03_confort_ed02-2015

Rear seats

Move the corresponding front seat forward

if necessary.

Place the head restraints in the low

position or remove them.

Remove the seat belt from its guide.

Folding the cushion and
backrest

Lift the cushion

by hand, lifting from

the rear.

Tip the seat cushion

fully against the

front seat.

Keep the seat belt guide

held against

the vehicle.

Pull control

forwards to release the seat

back

Fold the seat backrest

Bench seat with split cushion and backrest (left hand 2/3, right hand 1/3) which can be folded individually to adapt the load space in the boot.

Summary of Contents for DS 5

























































































































































































































































































































































































Search results

Summary of Contents for DS 5

Reviews:

Brands by name

Popular brands

DS Automobiles DS 5, Handbook

Search results

Summary of Contents for DS 5

Reviews:

Brands by name

Popular brands