manualshive.com logo in svg

DS Automobiles DS 5, Handbook

Share
Download
DS Automobiles DS 5 Handbook Download Page 210

DS5_en_Chap08_info-pratiques_ed02-2015

Fitting a wheel

Fitting the "space-saver" 
spare wheel

If your vehicle is fitted with alloy wheels, 
when tightening the bolts on fitting, it 
is normal to notice that the washers 
do not come into contact with the 
"space-saver" spare wheel. The wheel 
is secured by the conical surface of 
each bolt.

After changing a wheel

The wheel with the punctured tyre 
cannot be fitted under the vehicle. It 
must be stowed flat on the boot floor; 
use a cover to protect the inside of the 
boot.
Do not exceed 50 mph (80 km/h) when 
driving with the "space-saver" type 
spare wheel fitted.
Have the tightening of the bolts and the 
pressure of the spare wheel checked 
by a CITROËN dealer or a qualified 
workshop without delay.
Have the punctured wheel repaired 
and refitted to the vehicle as soon as 
possible.

List of operations

F

  Put the wheel in place on the hub.

F

  Screw in the bolts fully by hand.

F

  Pre-tighten the security bolt using the 

wheelbrace 

1

 fitted with the security 

 

socket 

5

.

F

  Pre-tighten the other bolts using the 

wheelbrace 

1

 only.

Summary of Contents for DS 5

























































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands