Canon 3175 Series User Manual Download Page 49

Page: 49 / 474

2-18

Setting Up

Chapter 2

LASER CLASS 3170 Series.
CFYA/YAH/YAN 120v US V1.0

Rear View

Handset (option)

LOW

OFF

RINGER VOLUME SWITCH

Adjust the volume of the ringer. Use a pen or
other pointed object to adjust the switch to
HIGH, LOW, or OFF.

HIGH

FACE-UP TRAY

Holds printed documents
after they are ejected
from the fax.

POWER SOCKET

Connect the power
cord here.

TELEPHONE LINE JACK (L2)

Connect an additional telephone
line here after installation of the
optional Dual-line Upgrade Kit for
the LASER CLASS

3170 Series.

LIFTING HANDLE

Grip the fax here and on
the opposite side to lift the
fax unit.

EXTENSION PHONE JACK

Connect the optional handset jack or an
extension phone jack here.

TELEPHONE LINE JACK (L)

Connect the telephone line here.

PARALLEL INTERFACE
PORT

Connect a parallel interface cable.
(This port is a standard feature for
the LASER CLASS

3170MS, and

available for the LASER CLASS

3170/3175 after installation of the
optional PCL6 Printer Board.)

TEST PRINT BUTTON

This button should only be used
by authorized Canon dealers.
Please do not press this button.

Summary of Contents for 3175 Series



























































































































































































































































































































































































































































































Search results

Summary of Contents for 3175 Series

Reviews:

Related manuals for 3175 Series

Brands by name

Popular brands

Canon 3175 Series, User Manual

Search results

Summary of Contents for 3175 Series

Reviews:

Related manuals for 3175 Series

Brands by name

Popular brands