Canon 3175 Series User Manual Download Page 415

Page: 415 / 474

16-12

Summary of Important Settings

Chapter 16

LASER CLASS 3170 Series.
CFYA/YAH/YAN 120v US V1.0

7.TX STAMP

Turn stamping off or on and how documents are to be
stamped. (

➞

12-8)

STAMP ACTION

DIRECT & MEMORY TX

Stamps only documents sent
direct and from memory.

DIRECT TX

Stamps documents sent with
direct sending only.

OFF

The stamp feature is turned off and disabled.

Note:

The stamp feature is available as an option. If the stamp option is not provided on your

fax machine, this item will not appear in the menu and PIN CODE will appear as item 7.

8.PIN CODE

Turns on the PIN code feature for dialing through a PBX
that requires PIN codes. (

➞

13-21)

OFF

Turn off the PIN code feature.

NECESS. PIN CODE

The Force PIN Code feature
requires entering PIN code for
every transaction.

OFF

PIN CODE BEF/AFT

Set the PIN code to appear as a
prefix or suffix of the telephone
number.

BEFORE TEL NO.

The PIN code appears as a
prefix.

AFTER TEL NO.

The PIN code appears as a
suffix.

Summary of Contents for 3175 Series



























































































































































































































































































































































































































































































Search results

Summary of Contents for 3175 Series

Reviews:

Related manuals for 3175 Series

Brands by name

Popular brands

Canon 3175 Series, User Manual

Search results

Summary of Contents for 3175 Series

Reviews:

Related manuals for 3175 Series

Brands by name

Popular brands