Canon 3175 Series User Manual Download Page 412

Page: 412 / 474

Chapter 16

Summary of Important Settings

16-9

Summar

y of

Impor

tant

Settings

LASER CLASS 3170 Series.
CFYA/YAH/YAN 120v US V1.0

5.ACTIVITY REPORT

Print an activity management report. (

➞

14-9)

1. AUTO PRINT

Print an activity report after every 40 transactions.

An activity report prints after the 40th transaction
is completed.

OFF

No activity report prints after the 40th transaction
is completed.

2. DAILY REPORT TIME

OFF

A time is not set to print a transaction report every
day.

Allows you to set a time for an activity to be
printed every day. Set the report time for the daily
report. Use 24-hour settings.

3.TX/RX SEPARATE

Print an activity report with receptions and transmissions
listed separately.

OFF

Transmissions and receptions are listed together in
chronological order.

Transmissions and receptions are arranged in
chronological order in separate lists.

6.PRT REPORT WHERE

Select a paper supply source for the activity report.

OFF

Report prints from the first available paper supply source.

The number and type of cassettes available depends on
the paper cassettes currently installed. Paper Cassette 2 is
optional for the LASER CLASS

3170/3170MS and

standard for the LASER CLASS

3175.

LASER CLASS

3170

CASSETTE 1

MP TRAY

LASER CLASS

3175 or LASER CLASS

3170/3170MS

with optional cassette

CASSETTE 1

CASSETTE 2
MP TRAY

Summary of Contents for 3175 Series



























































































































































































































































































































































































































































































Search results

Summary of Contents for 3175 Series

Reviews:

Related manuals for 3175 Series

Brands by name

Popular brands

Canon 3175 Series, User Manual

Search results

Summary of Contents for 3175 Series

Reviews:

Related manuals for 3175 Series

Brands by name

Popular brands