Canon 3175 Series User Manual Download Page 114

Page: 114 / 474

Chapter 3

Getting Started

3-23

Getting Star

ted

LASER CLASS 3170 Series.
CFYA/YAH/YAN 120v US V1.0

Returning to the Full Power Mode

The display tells you the fax has entered the energy saver mode with this
message:

ENERGY SAVER

Energy

Saver

The indicator under the energy saver button to the right of the LCD
display will also light red.

To restore the full power mode, press the

Energy Saver

button. While the

fax machine is powering up, PLEASE WAIT is displayed for a few
moments.

PLEASE WAIT

While the fax unit is powering up, you can perform any operation.

The following actions will automatically restore the full power mode:

❏

Receiving a document.

❏

Printing an Activity Management report pre-set for printing.

❏

Answering a call.

You can awaken the fax from the low-energy sleep mode by:

❏

Pressing the

Energy Saver

button.

❏

Setting a document on the fax for sending or copying.

Summary of Contents for 3175 Series



























































































































































































































































































































































































































































































Search results

Summary of Contents for 3175 Series

Reviews:

Related manuals for 3175 Series

Brands by name

Popular brands

Canon 3175 Series, User Manual

Search results

Summary of Contents for 3175 Series

Reviews:

Related manuals for 3175 Series

Brands by name

Popular brands