Canon 3175 Series User Manual Download Page 367

Page: 367 / 474

15-16

Maintenance & Frequently Asked Questions

Chapter 15

LASER CLASS 3170 Series.
CFYA/YAH/YAN 120v US V1.0

Storing the Paper Supply

Improper paper storage can affect the quality of the printing. Follow
these guidelines when you store paper.

❏

Store unused paper in its wrapping to protect the paper against
humidity.

❏

Do not store paper on the floor where humidity is higher.

❏

If the humidity of the surrounding area is higher than normal, store
the paper in a specially designed storage box.

❏

To prevent excessive paper curl, do not stack paper too high.

❏

Do not expose the stored paper supply to direct sunlight.

❏

If paper is moved to a location of very different temperature, store
the paper in the new location for at least one day before you use it.

Summary of Contents for 3175 Series



























































































































































































































































































































































































































































































Search results

Summary of Contents for 3175 Series

Reviews:

Related manuals for 3175 Series

Brands by name

Popular brands

Canon 3175 Series, User Manual

Search results

Summary of Contents for 3175 Series

Reviews:

Related manuals for 3175 Series

Brands by name

Popular brands