Canon 3175 Series, User Manual

Page: 459 / 474

G-12
Glossary
LASER CLASS 3170 Series.
CFYA/YAH/YAN 120v US V1.0
• Error TX Report If the fax fails to send a document because the other
party does not answer, even after automatic redialing, or if an error oc-
curs, then your fax will immediately print an error transmission report.
The report includes the facsimile number of the other party so you can
try sending again and can print part of the first page of the document so
you can identify it.
• Memory Clear Report When documents are stored in the memory if
power to the fax is cut off for more than 12 hours, the documents stored
in the memory will be erased. After power is restored, a Memory Clear
List will print to show you what documents have been erased. If power
is restored within 12 hours, the documents are not erased and no report
prints.
• Multi TX/RX Report When you send a document to more than one
destination, the fax prints a report to show you the name and numbers
of the other parties, whether the transactions were completed or not,
and errors if any. The fax automatically prints multi-transaction reports
for sending documents to more than one destination, delayed sending
documents to more than one destination, sending documents through a
relay fax to more than one destination, and sending confidential docu-
ments to more than one destination if the mailboxes are the same on
every fax unit.
•
Relay Broadcast Report
After sending a document through a relay
fax, you may receive a relay broadcast report from the fax machine that
relayed the document. This shows whether or not the document was
successfully relayed to all the final destinations. To receive a report, the
other machine must be set to print a relay broadcast report.
Resolution
The density of dots for an output device like a fax, scanner, or printer.
Expressed in terms of dots per inch (dpi). Low resolution causes font
characters and graphics to have a jagged appearance. Higher resolution
means smoother curves and angles as well as a better match to tradi-
tional typeface designs. Resolution values are represented by horizontal
data and vertical data, for example, 600
×
600dpi.
Restricted reception
The ability of the fax unit to restrict incoming documents. With this
feature turned on, the fax unit will receive documents only from speed
dialing numbers registered in your fax unit.
Rotary pulse
A rotary-pulse or pulse dial telephone is dialed by manually rotating a dial
to send pulses to the telephone switching system. When you pulse dial,
you will hear clicks. With tone dialing, you will hear tones.