Canon 3175 Series User Manual Download Page 424

Page: 424 / 474

Chapter 16

Summary of Important Settings

16-21

Summar

y of

Impor

tant

Settings

LASER CLASS 3170 Series.
CFYA/YAH/YAN 120v US V1.0

1.CONFID. MAILBOX

Set up confidential mailbox. (

➞

10-2)

1.SETUP FILE

Set up a confidential mailbox.

SET BOX #

Create a two-digit confidential mailbox number.

1.FILE NAME

Give the mailbox a name up to 24 characters long.

2.PASSWORD

Assign a password to protect the mailbox from being changed or deleted.

3.SUBADDRESS

Enter a 20-digit (max.) ITU-T subaddress for reception.

4.RX PASSWORD

Enter a 20-digit (max.) ITU-T password for reception.

5.# OF RX COPIES

Sets the number of copies printed from every document.

2.CHANGE DATA

Change all the mailbox settings done with the settings
above.

SET BOX #

Enter the number of the mailbox you want to change.

PASSWORD

Enter the password protecting the mailbox settings.
You can now change any of the settings listed in the table
above (

1.SETUP FILE

3.DELETE FILE

Delete a mailbox.

SET BOX #

Enter the number of the mailbox you want to delete.

PASSWORD

Enter the password protecting the mailbox you want to
delete.

2.RELAY TX GROUP

Set up relay box so your fax machine can relay document
transmissions to other fax machines in your area. (

➞

9-3)

1.SETUP FILE

Set up the relay box.

SET RLY TX GROUP#

Set a two-digit relay group number (

00-99

1.GROUP DIAL NAME

Give the relay group a name (length: 24 characters).

2.PASSWORD

Assign a four-digit password to protect the relay box settings.

3.SUBADDRESS

Enter a 20-digit (max.) ITU-T subaddress.

4.RX PASSWORD

Enter a 20-digit (max.) ITU-T password.

5.SELECT ORIG UNIT

Set your fax to check the incoming relay command to make sure the
originator is registered.

Receives and obeys incoming relay commands for registered

TEL=

originators only. Use the One-touch or Coded Speed Dialing buttons to
register originators.

OFF

Receives and obeys all incoming relay commands.

6.PRINT RX DOC.

Turns printing on/off for documents received for relay.

Prints a copy of every document relayed.

# OF RX COPIES

Set the number of document copies to print.

OFF

No copy is printed.

7.SELECT LOCATIONS

Use the One-touch or Coded Speed Dialing buttons to select the fax

TEL=

numbers to receive the document relayed from your fax machine.

*Default settings are in

bold

Summary of Contents for 3175 Series



























































































































































































































































































































































































































































































Search results

Summary of Contents for 3175 Series

Reviews:

Related manuals for 3175 Series

Brands by name

Popular brands

Canon 3175 Series, User Manual

Search results

Summary of Contents for 3175 Series

Reviews:

Related manuals for 3175 Series

Brands by name

Popular brands