Canon 3175 Series User Manual Download Page 432

Page: 432 / 474

Chapter 16

Summary of Important Settings

16-29

Summar

y of

Impor

tant

Settings

LASER CLASS 3170 Series.
CFYA/YAH/YAN 120v US V1.0

3.TEL SETTING

Allows you to restrict use of the telephone for voice
communication.

OFF

3. MEMORY LOCK RX

Turn forced memory receiving on and off. (

➞

13-17)

OFF

1.MEM LOCK

PASSWORD

Enter a four-digit password.

2.REPORT

Set reports to print (or not
print) when the forced
memory receiving feature is
on.

OUTPUT NO

Reports are not printed when
the forced memory receiving
feature is on.

OUTPUT YES

Reports are printed when the
forced memory receiving
feature is on.

3.TIME SETUP

Set a time to turn on forced
memory receiving.

OFF

1.START TIME

Turn on memory receiving at a
specified time.

EVERY DAY

Set up to 5 times for every day.

SELECT DAYS

Set up to 5 times for each
selected day of the week.

2.END TIME

Turn off memory receiving at
specified time.

EVERY DAY

Set up to 5 times for every day.

SELECT DAYS

Set up to 5 times for each
selected day of the week.

4. RX RESTRICTION

Turn off junk mail. (

➞

13-16)

OFF

Anyone can dial your fax and send a document.

Another party can dial your fax and send a document only
if their number is registered on your fax for a One-touch
or Coded Speed Dialing button.

Summary of Contents for 3175 Series



























































































































































































































































































































































































































































































Search results

Summary of Contents for 3175 Series

Reviews:

Related manuals for 3175 Series

Brands by name

Popular brands

Canon 3175 Series, User Manual

Search results

Summary of Contents for 3175 Series

Reviews:

Related manuals for 3175 Series

Brands by name

Popular brands