background image

2-30

Setting Up

Chapter 2

LASER CLASS 3170 Series.
CFYA/YAH/YAN  120v US V1.0

7.

Lift up the fax unit and hold it over Paper Cassette 2.

LIFTING THE FAX UNIT REQUIRES TWO PEOPLE. TO MOUNT
THE FAX UNIT ONTO PAPER CASSETTE 2, FOLLOW THE
GENERAL GUIDELINES AND ILLUSTRATION ON PAGE 2-10.

ALWAYS LIFT THE FAX UNIT BY THE LIFTING HANDLES AT THE
BOTTOM, TO AVOID TRAPPING YOUR FINGERS BETWEEN THE
FAX UNIT AND PAPER CASSETTE 2.

WHENEVER YOU MOVE THE FAX, BE SURE TO LIFT THE FAX
UNIT AND PAPER CASSETTE 2 SEPARATELY. DO NOT TRY TO
LIFT THEM TOGETHER.

If the fax unit is heavy to lift, remove Paper Cassette 1 and toner
cartridge before placing it on Paper Cassette 2.

8.

Make sure the front of the fax unit is facing the same direction as
the front of Paper Cassette 2. Slowly lower the fax unit onto the
four positioning poles on the corners of Paper Cassette 2.

Summary of Contents for 3175 Series



























































































































































































































































































































































































































































































Reviews: