Canon 3175 Series User Manual Download Page 78

Page: 78 / 474

Setting Up

Chapter 2

Setting Up

2-47

LASER CLASS 3170 Series.
CFYA/YAH/YAN 120v US V1.0

• Make sure that the paper guides are set correctly. To print with the MP

tray, you also need to select the paper size in the USE MP TRAY menu.
(

➞

2-48)

• Make sure that the paper is loaded correctly and that the leading edge

is fully inserted into the fax unit.

• Make sure that the paper sensor is resting on top of the paper. (The

paper sensor must rest on top of the paper, not just touch the edge of
the paper.)

• To avoid damaging the MP tray, close it when not in use. Remove and

store any remaining print media. Slide the extension tray in before
closing the MP tray.

PAPER SENSOR

ACCEPTABLE

NOT ACCEPTABLE

Summary of Contents for 3175 Series



























































































































































































































































































































































































































































































Search results

Summary of Contents for 3175 Series

Reviews:

Related manuals for 3175 Series

Brands by name

Popular brands

Canon 3175 Series, User Manual

Search results

Summary of Contents for 3175 Series

Reviews:

Related manuals for 3175 Series

Brands by name

Popular brands