Canon 3175 Series User Manual Download Page 384

Page: 384 / 474

Chapter 15

Maintenance & Frequently Asked Questions

15-33

Maintenance &

equently Asked

Questions

LASER CLASS 3170 Series.
CFYA/YAH/YAN 120v US V1.0

11. Place the end of the plastic loop over the end of the stub so it stays

in place.

12. Close the ADF cover and press down on it slightly until you hear

it lock in place, and lower the document feeder tray.

13. Connect the power cord of the fax unit at the power source.

Refilling the Stamp Ink Compartment (option)

Follow this procedure to refill the stamp ink compartment if you are
using the optional stamp feature.

❏

Please contact your local authorized Canon dealer when you run out
of ink.

Disconnect the power cord of the fax unit from its power source.

Follow steps 6 to 8 on pages 15-30 and 15-31 to open the ADF
cover up to the full open position.

Summary of Contents for 3175 Series



























































































































































































































































































































































































































































































Search results

Summary of Contents for 3175 Series

Reviews:

Related manuals for 3175 Series

Brands by name

Popular brands

Canon 3175 Series, User Manual

Search results

Summary of Contents for 3175 Series

Reviews:

Related manuals for 3175 Series

Brands by name

Popular brands