DS7200V2-UK Installer's Guide
Copyright
2007 Bosch Security Systems, Inc.
P/N: 4998152533-02 Page 111
PART IV: CONTROL PANEL PROGRAMMING
Digit to be Dialed
Enter at the Keypad
1 1
2 2
3 3
4 4
5 5
6 6
7 7
8 8
9 9
0 10
* 11
# 12
p (4-second pause)
13
f (on-hook, pause, off-hook)
14
reserved 15
t (terminate)
0
Table 42: Phone Number Selections
SIA 300 with Text Blocks
The control panel sends reports using the SIA format when “3” is entered into the appropriate reporting format address. See
Format for Destination 1 (2) on page 43 for more information. An additional format (selection of “11”) is available to include
ASCII text with the SIA event codes.
If the SIA event includes a zone number as one of its parameters, and the zone represents one of the control panel’s 40
locations, the control panel sends the zone’s programmable location text (see Location Text on page 79 for more information).
The event (N) block is sent first followed by the text (A) block. If there is no zone number for the event, then no ASCII text is
reported.
