ADIC Scalar AIT 440, Installation And Operating Manual

Page: 28 / 205

Installing the Hardware
Installation and Operation 3
Step 3 – Obtain additional equipment
The following table lists the additional equipment you may need to
obtain to install the library.
Step 4 – Protect the library against ESD
If you remove the cover from the library, its internal components are
susceptible to damage from electrostatic discharge (ESD). To ensure that
the work area is as free from ESD as possible, place a grounded, static
protection mat on the work surface, and wear a static protection wrist
band. If a mat and wristband are unavailable, discharge static electricity
from your body before touching the inside of the library or the tape
drives. (Touch a known grounded surface, such as your computer's metal
chassis.)
Equipment For more information...
SCSI cables*
* These items can be purchased from ADIC.
See Appendix A .
SCSI terminators*
Power cord (if outside the U.S. or
Canada)*
Data cartridges* See page 16 .
Cleaning cartridges* See page 21 .
Bar code labels* See page 16 .
Rack-mount model: 19-inch by 30- to
36- inch EIA standard rack with
extension support legs
Contact a rack supplier.