ADIC Scalar AIT 440, Installation And Operating Manual

Page: 74 / 205

Operating the Library
Installation and Operation 49
Main Menu
Use the Main Menu (shown below) to access LCD options and functions.
To access the Main Menu, press
>(VFDSH@
from the Main Screen.
S
Select Main Screen to return to the Main Screen.
S
Select Extend/Retract E/E to control the entry/exit port (see page
56 ).
S
Select Interface Menu to change the CHM control mode (see page
53 ) and configure the serial ports (see page 127 ).
S
Select Configuration Menu to set or change SCSI IDs, security, or
the library's other configuration options (see Chapter 2 ).
S
Select Maintenance Menu to insert and remove cartridges (see page
56 ), clean the tape drives (see page 70 ), run demos (see page 105 ),
or perform diagnostic tests (see page 113 ).
S
Select Library Info Menu to learn about library operations (see
page 131 ) and tape drive operations (see page 72 ).
→
M a i n S c r e e n
E x t e n d / R e t r a c t E / E
I n t e r f a c e M e n u
C o n f i g u r a t i o n M e n u
↓