ADIC Scalar AIT 440, Installation And Operating Manual

Page: 148 / 205

Performing Diagnostics
Installation and Operation 125
Cycle Solenoid
The Cycle Solenoid test exercises the solenoid that controls the locking
mechanism on the front door. To run the Cycle Solenoid test:
1. From the Diagnostics Menu, press
> @
and
> @
to select Cycle
Solenoid and press
>(QWHU@
. The library displays the following screen:
2. Press
> @
and
> @
to select the number of cycles, in increments of ten
(up to 250), that you want the Cycle Solenoid test to run and press
>(QWHU@
. You will hear a clicking sound.
S e t C y c l e s 1 0
↑
I n c r e a s e
↓
D e c r e a s e