ADIC Scalar AIT 440, Installation And Operating Manual

Page: 27 / 205

Chapter 1
2 Scalar AIT 440/480
Step 1 – Unpack the library
Complete the unpacking steps printed on the box. Save all original
packing materials in case you need to ship or move the library later.
Step 2 – Check the accessories
Make certain you received the following accessories:
S
Power cord (U.S. and Canada only)
S
SCSI jumpers (three for narrow SCSI libraries and four for wide
SCSI libraries)
S
AIT Data Cartridge Magazines with covers (four for the Scalar AIT
440 and eight for the Scalar AIT 480)
S
Two cleaning packets for the door
S
Two keys for the door lock
S
One spare drive blank (in addition to those installed)
➤
Important
Your library has been shipped to you with
the tape drives pre-installed. For libraries that will operate
with fewer than four tape drives, drive blanks have been
installed in the unused carrier slots. For more information,
see
Chapter 4 .
S
Slide rails and mounting hardware for the rack-mount model