ADIC Scalar AIT 440, Installation And Operating Manual

Page: 147 / 205

Chapter 9
124 Scalar AIT 440/480
Cycle S Axis
The Cycle S Axis test positions the CHM in front of the fixed cartridge
slot and moves the CHM back and forth on the short axis the number of
times you specify. To run the Cycle S Axis test:
1. From the Diagnostics Menu, press
> @
and
> @
to select Cycle S Axis
and press
>(QWHU@
. The library displays the following screen:
2. Press
> @
and
> @
to select the number of cycles, in increments of ten,
that you want the Cycle S Axis test to run and press
>(QWHU@
.
Cycle L Axis
The Cycle L Axis test moves the CHM up and down on the long axis
the number of times you specify. To run the Cycle L Axis test:
1. From the Diagnostics Menu, press
> @
and
> @
to select Cycle L Axis
and press
>(QWHU@
. The library displays the following screen:
2. Press
> @
and
> @
to select the number of cycles, in increments of ten,
that you want the Cycle L Axis test to run and press
>(QWHU@
.
S e t C y c l e s 1 0
↑
I n c r e a s e
↓
D e c r e a s e
S e t C y c l e s 1 0
↑
I n c r e a s e
↓
D e c r e a s e