ADIC Scalar AIT 440, Installation And Operating Manual

Page: 64 / 205

Configuring the Library
Installation and Operation 39
Disabling security from the LCD
1. From the Configuration Menu, select Set Security Off and press
>(QWHU@
. The library displays the following screen:
Note: If the menu displays Set Security On, the LCD security
function is disabled. However, security may have been
enabled by your application using a SCSI command. If so,
it must be disabled by your application (see your software
documentation or the
Scalar AIT 440/480 Libraries SCSI
Reference ).
2. To enter the three-digit password, press
> @
and
> @
to move from
column to column and
> @
and
> @
to change the numbers. When you
are finished, press
>(QWHU@
.
If you forget the password
Try entering the default password (000). If the default password has been
changed and you do not know what it is, call your service provider. (A
service technician can display the password on the Configuration screen
from the Diagnostic console interface.)
S e t S e c u r i t y O f f :
E n t e r P a s s w o r d 0 0 0
T h e n
↑
P r e s s E n t e r
→