ADIC Scalar AIT 440, Installation And Operating Manual

Page: 36 / 205

Installing the Hardware
Installation and Operation 11
3. Remove the air filter grilles from the front of the library by lifting
the outside edges and pulling the grilles away from the library (see
Figure 1-4 ).
4. Using four people, or two people and a fork lift, lift the library by
the handles and lower it onto the slide rails so the mounting tabs on
each side of the library fit into the slots in the rails (see
Figure 1-4 ).
Make sure all six mounting tabs are fitted securely into the slots.
5. Press the spring clips and slide the library most of the way into the
rack.
6. Install one 8-32
×
button head screw into the screw hole on each
rail, as shown in Figure 1-5 .
Figure 1-5 Attaching the screws to the sides of the library
7
16
------