ADIC Scalar AIT 440, Installation And Operating Manual

Page: 183 / 205

Appendix A
160 Scalar AIT 440/480
SCSI terminator specifications
You can use one of the following types of terminators:
Differential external terminator
S
When the library is equipped with AIT-1 drives, or AIT-2 drives
operating in HVD mode, use ADIC p/n 61-1140-01A
S
When the library is equipped with AIT-2 drives operating in LVD
mode, use ADIC p/n 61-3020-01
Power cord requirements
The library includes an appropriate power cord for United States and
Canada shipments, and for some international shipments.
United States and Canada
The library is shipped with a seven-foot (2.1 meter), three-conductor AC
power cord for 120-volt use in the United States and Canada. If you plan
to use a 220-volt AC power cord, make certain it meets the following
criteria:
S
A molded NEMA 6-15P attachment plug on one end and a molded
IEC type CEE-22 female connector on the other end
S
An SJT or SVT type, three-conductor, 18 AWG minimum
S
Compliance with local electrical code