ADIC Scalar AIT 440, Installation And Operating Manual

Page: 138 / 205

Performing Diagnostics
Installation and Operation 115
Accessing the Diagnostics Menu
To access the Diagnostics Menu:
1. If necessary, disable security. See page 39 .
2. Change to LCD Interface control mode. See page 53 .
3. From the Main Menu, press
> @
to select Maintenance Menu and
press [Enter].
4. From the Maintenance Menu, press
> @
to select Diagnostics Menu
and press
>(QWHU@
. The library displays the Diagnostics Menu:
5. Refer to the appropriate section on the following pages to perform
each test.
Specifying element indexes
Some of the tests require you to specify one or more element indexes.
Refer to
Appendix C for diagrams showing the element indexes for the
Scalar AIT 440/480.
Stopping diagnostic tests
To stop a diagnostic test, press
>(VFDSH@
, then
>(QWHU@
.
→
S e l f T e s t
P o s i t i o n t o E l e m
P a r k
M o v e C a r t r i d g e
↓