ADIC Scalar AIT 440, Installation And Operating Manual

Page: 156 / 205

Using the Library Info Menu
Installation and Operation 133
SCSI mode parameters
To view the SCSI Mode Parameters screen, select SCSI Mode Params
from the SCSI Menu. The library displays the following screen:
Use this screen to check the settings of various operating mode
parameters. These parameters are equivalent to the parameters reported
by the library in response to a MODE SENSE command issued by the
software application. Typically, the values of these parameters are
changed by a MODE SELECT command.
The SCSI Mode Parameters screen provides the current (Cur), default
(Def), and saved (Sav) values for each parameters listed below.
S
The current value is the value currently active. It is either the
power-on default or a temporary value set by the latest MODE
SELECT command.
S
The default value is the original value set at the factory.
S
The saved value is the value specified as the power-on default by a
MODE SELECT command. After a saved value has been specified
with a MODE SELECT command, this value takes effect each time
you power on the library.
E L E M E N T A D D R P A G E :
C H M A d d r , C u r n n
C H M A d d r , D e f n n
C H M A d d r , S a v n n
↓