ADIC Scalar AIT 440, Installation And Operating Manual

Page: 46 / 205

Installing the Hardware
Installation and Operation 21
Step 7 – Install a cleaning cartridge
The following procedure describes how to manually install a cleaning
cartridge in the fixed cartridge slot. To replace this cartridge later, use
the Remove Cartridge and Insert Cartridge options on the Maintenance
Menu and the entry/exit port, as described on
page 56 .
➤
Important
Use a Sony TCL cleaning cartridge (or a
cleaning cartridge approved by ADIC for use with the AIT
drive).
➤
Important
If you want to clean drives using the Clean
Drives Menu on the LCD, you must install a cleaning
cartridge in the fixed cartridge slot.
To install a cleaning cartridge in the fixed cartridge slot:
1. Position the cartridge so that the window showing the tape reels is
toward the top (see
Figure 1-15 ).
2. Insert the cartridge into the fixed cartridge slot until it snaps into
place.