ADIC Scalar AIT 440, Installation And Operating Manual

Page: 21 / 205

xx Scalar AIT 440/480
About this manual
Use this manual to install, configure, operate, maintain, and diagnose
problems with the Scalar AIT 440 or Scalar AIT 480 Library and its
enclosed AIT tape drives. It includes the following chapters:
S
Chapter 1 explains how to install and set up the library.
S
Chapter 2 describes how to configure the library.
S
Chapter 3 describes how to check your setup.
S
Chapter 4 describes basic library operations.
S
Chapter 5 describes basic tape drive operations.
S
Chapter 6 describes basic maintenance procedures.
S
Chapter 7 describes how to move, pack, and ship the library.
S
Chapter 8 describes how to use the LCD demo programs.
S
Chapter 9 describes how to perform diagnostic tests.
S
Chapter 10 describes the Library Info menu.
S
Chapter 11 describes basic troubleshooting procedures.
S
Appendix A provides basic library specifications.
S
Appendix B provides LCD error codes.
S
Appendix C shows the element indexes for library locations.
A quick reference card is provided at the end of the manual. Remove
this card and keep it near your library. Use the
Quick Reference as a
reference for using the operator panel and interpreting error codes.