ADIC Scalar AIT 440, Installation And Operating Manual

Page: 172 / 205

Using the Library Info Menu
Installation and Operation 149
Fields on Element Occupied screen
Element Occupied:
INX Indicates the element index for which information is being displayed.
Addr
(Address) Indicates the SCSI address of this element.
Src (Source) Indicates the index of the last storage element from which the cartridge was
moved.
O (Occupied) Indicates whether the library considers the specified element location to
contain a data cartridge:
0 – The element location does not contain a data cartridge.
1 – The element location contains a data cartridge.
V (Valid) Indicates whether the Occupied flag is accurate:
0 – The Occupied flag is questionable (may not be accurate).
1 – The Occupied flag is accurate.
P (Present) Indicates whether a specific magazine or tape drive is installed. If the element
index references a storage element, this flag indicates whether that particular
magazine is installed. If the element index references a tape drive, this flag
indicates whether that particular drive is installed.
0 – Not installed.
1 – Installed.
Note: This flag is not used for the CHM or the entry/exit port.
A
(Accessible) Indicates whether a drive is empty, a cartridge is loaded in the drive, or the
cartridge is ejected:
0 – A cartridge may be loaded in the drive.
1 – The drive is empty, or the cartridge is ejected and ready to be picked.
CTS Indicates whether the element is a tape drive:
0 – The element is a tape drive.
1 – The element is not a tape drive.
Warning Not currently used.