ADIC Scalar AIT 440, Installation And Operating Manual

Page: 42 / 205

Installing the Hardware
Installation and Operation 17
To affix bar code labels, position the label as shown in Figure 1-11 , using
the recessed area on the cartridge for guidance. Make sure you orient the
label correctly.
Set the write-protect switches
Make sure the write-protect switch on each data cartridge is set
appropriately (see
Figure 1-12 ). You can use a ball-point pen or similar
instrument to move the write-protect switch. If the write-protect switch
window is red, the cartridge is write-protected.
Figure 1-11 Affixing a bar code label to a data cartridge
CAUTION
If you remove a bar code label from a data cartridge
without replacing it, make sure to clean the label area
thoroughly. Bar code labels can leave adhesive on the
label area, which may cause the data cartridge to stick
to the CHM.