ADIC Scalar AIT 440, Installation And Operating Manual

Page: 162 / 205

Using the Library Info Menu
Installation and Operation 139
Fields on SCSI Sense Data screens
SCSI Sense Data:
KEY This is the sense key returned by the REQUEST SENSE command, as
follows:
0h–No Sense. There is no specific sense key information to report.
2h–Not Ready. The library is not ready to perform motion commands.
4h–Hardware Error. The library detected a hardware failure while
performing the command or during a self-test. Operator intervention may
be required.
5h–Illegal Request. There was an illegal parameter in the command
descriptor block or in the additional parameters supplied as data for a
command, or the library is in the wrong mode to execute the command.
6h–Unit Attention. The cartridge inventory may have been violated.
Bh–Aborted Command. The library aborted the command. The initiator may
be able to recover by trying the command again.
ASC This is the Additional Sense Code, which, along with the Additional Sense
Code Qualifier, provides information describing a specific error condition.
ASCQ This is the Additional Sense Code Qualifier, which, along with the Additional
Sense Code, provides information describing a specific error condition.
Byte 15 This is the Sense Key Specific data, which provides additional information
about an error condition. This information is valid only for the Illegal Request
(5h) sense key.
Byte 16 This is the first byte of the Field Pointer data. It indicates which byte in the
command had an error.
Byte 17 This is the second byte of the Field Pointer data.