ADIC Scalar AIT 440, Installation And Operating Manual

Page: 80 / 205

Operating the Library
Installation and Operation 55
S
Store cartridges with the write-protect switch in the protected
position
(the red switch is fully visible).
S
Store data cartridges in a cartridge magazine. In the cartridge
magazine, cartridges are protected from airborne contaminants by a
clear plastic cover.
Replacing a single cartridge
As described in this section, you can use several different methods to
replace single cartridges without opening the library door.
S
Use the Extend/Retract E/E option to insert or remove cartridges
through the entry/exit port.
S
Use the Remove Cartridge option to remove the cartridge.
S
Use the Insert Cartridge option to replace the cartridge.
³
Important
Do not open the library door to replace
individual cartridges. Opening and closing the library
door causes the library to update the cartridge
inventory, which takes approximately 2½ to 5 minutes.
Using the Extend/Retract E/E option
1. Make sure that security is disabled (see page 39 ).
2. Select Extend/Retract E/E from the Main Menu. The library extends
or retracts the entry/exit port transport arm, depending on its current
position.