ADIC Scalar AIT 440, Installation And Operating Manual

Page: 87 / 205

Chapter 4
62 Scalar AIT 440/480
3. Make sure the CHM and its cabling are safely out of the way of the
magazines. If necessary, move the CHM to the bottom of the long
axis by pushing firmly against its base.
4. If necessary, manually rotate the drum assembly to access the
cartridge magazine you want to remove.
5. Grasp the cartridge magazine on either side, pull the upper end out
first, and remove it from the mounting plate. See
Figure 4-5 .
6. Replace the magazine by positioning it over the mounting plate with
the single mounting guide toward the top.
Figure 4-5 Replacing a cartridge magazine