ADIC Scalar AIT 440, Installation And Operating Manual

Page: 149 / 205

Chapter 9
126 Scalar AIT 440/480
Cycle Drum
The Cycle Drum test rotates the drum assembly 180 degrees. To run the
Cycle Drum test:
1. From the Diagnostics Menu, press
> @
and
> @
to select Cycle Drum
and press
>(QWHU@
. The library displays the following screen:
2. Press
> @
and
> @
to select the number of cycles, in increments of ten,
that you want the Cycle Drum test to run and press
>(QWHU@
.
Cycle E/E
The Cycle E/E test exercises the entry/exit port transport assembly. To
run the Cycle E/E test:
1. From the Diagnostics Menu, press
> @
and
> @
to select Cycle E/E
and press
>(QWHU@
. The library displays the following screen:
2. Press
> @
and
> @
to select the number of cycles, in increments of ten,
that you want the Cycle E/E test to run and press
>(QWHU@
.
S e t C y c l e s 1 0
↑
I n c r e a s e
↓
D e c r e a s e
S e t C y c l e s 1 0
↑
I n c r e a s e
↓
D e c r e a s e