ADIC Scalar AIT 440, Installation And Operating Manual

Page: 29 / 205

Chapter 1
4 Scalar AIT 440/480
Step 5 – Prepare the library
Preparing to install the standalone library
The standalone library weighs approximately 211 pounds (96 kg) with
four tape drives installed. This model includes two handles on each side
for moving the library. The handles are located underneath the side
panels, as shown in
Figure 1-1 . To remove the side panels, use a
flat-blade screwdriver to loosen the captive screws at the rear of the
library (two at the rear of each side panel). Then, pull each side panel
back and away from the library.
Figure 1-1 Removing the side panels to access handles