ADIC Scalar AIT 440, Installation And Operating Manual

Page: 151 / 205

Chapter 9
128 Scalar AIT 440/480
2. If you want to control CHM motion, change the control mode to the
appropriate serial port mode (see
page 53 ).
³
Important
Do not change to a serial port control
mode if you want to connect a serial port to a tape drive.
3. From the Interface Menu, press
> @
and
> @
to select Config 25-Pin
Port or Config 9-Pin Port (for narrow SCSI libraries) or Config 25/9
Pin Menu (for wide SCSI libraries). The library displays a screen
similar to the following:
Note: An asterisk (*) indicates the current connection.
C o n n e c t D r i v e 1
C o n n e c t D r i v e 2
C o n n e c t D r i v e 3
C o n n e c t D r i v e 4
↓