ADIC Scalar AIT 440, Installation And Operating Manual

Page: 116 / 205

Packing and Shipping the Library
Installation and Operation 93
Preparing the library for shipping
Before you pack the library, complete the preliminary steps listed in the
following table.
Step Description
1
Turn the key in the lock. When the interlock mechanism releases, open
the door.
CAUTION: Do not force the door open. The interlock mechanism may
be prevented from releasing by LCD security or by the application
software.
2 Turn off the power.
3
Remove the power cord*, SCSI cables*, terminators*, and jumpers*
from the back of the library. Leave the tape drives and drive blanks in
the library.
* If you need to ship these items, pack them in the accessories box. Do not return these items if you are returning the
library to the factory.
4 Remove all data cartridge magazines.*
5
For rack-mount models, refer to the instructions on the following pages
for removing the library from the rack.
For standalone models, handles are located underneath the side panels
for lifting the library. To remove the side panels, loosen the four captive
screws at the back of the library (two captive screws for each panel),
and pull each panel back and away from the library (see
page 4 ).