ADIC Scalar AIT 440, Installation And Operating Manual

Page: 117 / 205

Chapter 7
94 Scalar AIT 440/480
Removing the rack-mount model
Preparation
S
Obtain a fork lift or enlist the help of at least three additional people.
S
Obtain the following tools:
S
T-15 TORX driver
S
T-25 TORX driver
Procedure for removing the library
To remove the library from a rack:
1. Extend the extension support legs on the rack.
2. Remove the air filter grilles from the front of the library by lifting
on the outside edges and pulling the grilles away from the library.
3. Use a T-25 TORX driver to remove the two pan head screws that
secure the library to the rack, as shown in
Figure 7-1 . (A clip nut
may have been installed over the screw hole on the rack.)
WARNING!
The rack-mount library weighs 137 – 179 pounds
(62 – 81 kg); the standalone library weighs 190 –
238 pounds (86 – 110 kg).
You need at least 4 people, or 2 people and a small
fork lift, to lift either model.