ADIC Scalar AIT 440, Installation And Operating Manual

Page: 83 / 205

Chapter 4
58 Scalar AIT 440/480
5. Press
> @
or
> @
to set the source element index (the index of the slot
or tape drive where the cartridge is located). For more information
about element indexes, see .
6. Press
>(QWHU@
. The CHM moves the cartridge to the entry/exit transport
arm, and the transport arm extends to the entry/exit port. The library
displays a screen similar to the following (the source index will be
different):
7. Press down on the entry/exit port PUSH tab and remove the cartridge
(see
Figure 4-3 on page 58 ).
8. Press
>(QWHU@
to retract the entry/export transport arm.
9. Press
>(VFDSH@
to return to the Maintenance Menu.
Using the Insert Cartridge option
1. Make sure security is disabled (see page 39 ).
2. Change to LCD Interface control mode (see page 53 ).
3. From the Main Menu, select Maintenance Menu.
R e m o v e 0
→
E / E
P r e s s E N T E R t o
R e t r a c t E / E