ADIC Scalar AIT 440, Installation And Operating Manual

Page: 140 / 205

Performing Diagnostics
Installation and Operation 117
Position to Element
The Position to Element test positions the CHM in front of a tape drive,
fixed cartridge slot, or magazine slot. To run the Position to Element test:
1. From the Diagnostics Menu, press
> @
or
> @
to select Position to
Element and press
>(QWHU@
. The library displays the following screen:
2. Press
> @
and
> @
to select the element index (shown in the upper
right corner) where you want to position the CHM, and press
>(QWHU@
.
The library moves the CHM and, if necessary, rotates the drum so
the CHM is positioned in front of the element you indicated. When
the move is complete, the library displays a message similar to the
one below (the element index will differ):
3. To run the test again with a different element index, press
>(VFDSH@
to
return to the Diagnostics Menu and repeat steps 1 and 2.
Park
The Park test moves the CHM to the bottom of the long axis (the park
position).
S e t D e s t i n a t
i
o n 0
↑
I n c r e a s e
↓
D e c r e a s e
P O S I T I O N T O 3 :
S t a t u s : C o m p l e t e